• sns02
  • sns04
  • sns01
  • sns03

Layin samar da wutar lantarki na Reactor Disk Core Cut to Length Transformer

Layin samar da wutar lantarki na Reactor Disk Core Cut to Length Transformer Hotunan da aka nuna
  • Layin samar da wutar lantarki na Reactor Disk Core Cut to Length Transformer
  • Layin samar da wutar lantarki na Reactor Disk Core Cut to Length Transformer
  • Layin samar da wutar lantarki na Reactor Disk Core Cut to Length Transformer
  • Layin samar da wutar lantarki na Reactor Disk Core Cut to Length Transformer

Takaitaccen Bayani:

Ana amfani da Layin Cut-to-Length na Reactor Disk Core don sarrafa babban da matsakaicin girman reactor core wedge stack na na'urar. Kayan aikin na iya kammala ciyarwa ta atomatik, hudawa da yankewa, chamfering, da rarrabuwa da kuma tarawa ta atomatik a ƙarshen biyu.


Sauke shi azaman PDF

Cikakken Bayani game da Samfurin

Bidiyo

Tambayoyin da ake yawan yi akai-akai

Gabatarwar Layin Yankan Shunt Reactor Core

1. Kayan da za a sarrafa a kan wannan injin yanke zuwa tsawon

Kayan aiki: Silicon Steel

Juriyar Kayan Aiki: ±0.1mm

Burrs na Kayan Aiki: ≤0.03mm

Matakan Kayan S: 0.1mm≤ 1000mm

Matakan Wave na Kayan Aiki: ≤15 mm / 1000mm

 

2. Tsarin aiki na injin yankewa na tsakiya

Kauri na Kayan Aiki: 0.18~0.35mm

Faɗin Kayan Aiki: 100~600mm

Tsayin Core(H1):60~400mm

Girman Mataki: 0-600mm (an tsara shi)

 

3. Yanke daidaiton sarrafa injin

Tsawon Haƙuri: ± 0.02mm/200mm;

Juriyar Kusurwa: ±0.005°

Burn ɗin yankewa: ≤0.02mm (Sassaka miliyan 1/Nika)

Burr na Naushi: ≤0.02mm（Naushi dubu 200/Nika）；

 

4. Tsarin layin CNC mai yankewa zuwa tsayi:

Matsakaicin saurin ciyarwa: 200m/min

Ingancin Gudun Aiki: 120m/min (wanda ya shafi ingancin kayan aiki da siffar yankewa);

Saurin Yankewa 25*2=50pc/min (Yana da alaƙa da siffar lamination)

  • Na baya:
  • Na gaba:

    • Q1: Yadda ake samun ingancin samfurin?

    Takardar shaidar ƙasa ta amince da ingancin, manyan ma'aikatan dubawa da dama, kuma mai samar da kayan alama yana tabbatar da aminci da amincin komai daga ajiya har zuwa kayan da aka gama.

     

    Q2: Shin kuna ba da shigarwa da horo a ƙasashen waje?

    A: Zabi ne. Kamfaninmu zai samar da jagora da bidiyo don shigarwa da aiwatarwa.

    Idan kuna buƙata, za mu iya aika injiniyoyi don shigarwa da horo a ƙasashen waje.

     

    Q3: Har yaushe garantin yake?

    A: Lokacin garantin shine watanni 12. A duk lokacin da wata matsala ta taso, kamfaninmu zai amsa cikin awanni 24.

    • Rubuta saƙonka a nan ka aika mana da shi

    Nau'ikan samfura