+86 17854106058
trihope@aliyun.com
Itacen Laminated mai ƙarfi don rufin mai
Cikakkun bayanai game da samfura:
Ana ƙera allon rufewa bisa ga ƙa'idodin IEC, a cikin takarda ɗaya kuma a cikin kauri har zuwa mm 8. Ana iya ƙara girman kauri har zuwa mm 150 ta hanyar amfani da laminations na Transformer.
Kayan da aka yi amfani da su wajen yin zanen katako masu laminated sune katakon birch da willow masu inganci. Bayan tafasa, yankewa, busarwa, ana yin waɗannan katakon a matsayin fenti. A ƙarshe, za a manne su da ruwan manne na musamman sannan a sarrafa su a ƙarƙashin zafi mai yawa da matsin lamba.
Faɗin Fuskar Veneer (mm)
|
Kauri na Al'ada | Nisa daga kowace ma'ana a saman saman rufin da ya karkace daga madaidaicin ma'aunin nauyi mai sauƙi | |
| Tsawon murfin 500 | Tsawon veneer 1000 | |
| ≤15 | 2.0 | 4.0 |
| ＞15..≤25 | 1.5 | 3.0 |
| ＞25..≤60 | 1.0 | 2.0 |
| ＞60 | 1.0 | 1.5 |
Ingancin Bayyanar
| Abu | Nisan da aka yarda |
| kumburi |
Ba a yarda ba |
| Fashewa | |
| Matattu Kulli | |
| Mannewa ga Jikin Ƙasashen Waje | |
| Ramin Ƙwaro | |
| Ruɓewa | |
| Gurɓatawa | |
| Kumburi | An yarda da wasu kaɗan, ba su da tasiri a amfani |
| Ra'ayi | |
| Launi-bambance da kuma feshi | |
| Faci a kowace murabba'in mita a saman | ≤3 |
Kayan Gwaji na GB--- Kafin a Kai Gaggawa Duba masana'anta
| Kayan Gwaji | Naúrar | Daidaitacce | Hanyar Gwaji | |
| Ƙarfin Lanƙwasawa a Tsaye | Zuwa ga A | Mpa | ≥65 | GB/T2634—Tsarin Gwaji na 2008 |
| Zuwa ga B | ≥65 | |||
| Tsarin lanƙwasawa na tsaye na elasticity | Zuwa ga A | Gpa | ≥8 | |
| Zuwa ga B | ≥8 | |||
| Matsi (ƙasa da 20MPa) | Zuwa C | % | ≤3 | |
| Hanji | ≥70 | |||
| Ƙarfin tasiri (gwajin gefe) | Zuwa ga A | KJ/㎡ | ≥13 | |
| Zuwa ga B | ≥13 | |||
| Ƙarfin yankewa tsakanin lamina | Mpa | ≥8 | ||
| Ƙarfin wutar lantarki a tsaye (90) ℃+ 2 ℃) | KV/mm | ≥11 | ||
| Ƙarfin wutar lantarki a tsaye (90) ℃+ 2 ℃) | KV | ≥50 | ||
| Yawan aiki | g/cm³ | >1.1~1.2 | ||
| Yawan ruwa | % | ≤6 | ||
| Ragewa bayan bushewa | Zuwa ga A | % | ≤0.3 | |
| Zuwa ga B | ≤0.3 | |||
| Zuwa kauri | ≤3 | |||
| Shan mai | % | ≥8 | ||
Gida mai canza wutar lantarki mai aji 5A tare da cikakken mafita ga masana'antar canza wutar lantarki
1, Aainihin masana'anta tare da cikakkun kayan aikin cikin gida
2, ACibiyar R&D ta ƙwararru, tana da haɗin gwiwa da sanannen Jami'ar Shandong
3, AKamfanin da ya yi fice a fannin aiki, wanda ya samu takardar shaidar ka'idojin kasa da kasa kamar ISO, CE, SGS da BV.
4, Amafi kyawun mai samar da kayayyaki masu araha, duk manyan abubuwan haɗin gwiwa samfuran ƙasashen duniya ne kamar Simens, Schneider da Mitsubishi da sauransu.
5, Aabokin hulɗa na kasuwanci mai aminci, wanda aka yi wa aiki a ABB, TBEA, PEL, ALFANAR, ZETRAK da sauransu
Q1: Wane girman itace mai yawa za ku iya bayarwa?
Amsa: Za mu iya tallafawa allon lamination daga kauri 8mm–70mm, Tsawon da faɗin za a iya keɓance su bisa ga girman ku.
Q2: Yaya ake tabbatar da ingancin?
Amsa: Takardar shaidar ƙasa ta amince da ingancin, manyan ma'aikatan dubawa da dama, masu samar da kayan alamar suna tabbatar da aminci da amincin komai tun daga ajiya har zuwa kayan da aka gama.
Q1: Za ku iya samar da sabis na makullin juyawa don sabon masana'antar canza wutar lantarki?
Amsa: Eh, muna da kwarewa mai kyau wajen kafa sabuwar masana'antar na'urar canza wutar lantarki.
Kuma ya yi nasarar taimaka wa abokan cinikin Pakistan da Bangladesh wajen gina masana'antar transfoma.
